DIY reside facet reflect

I got here across a snapshot on Pinterest of a live edge replicate that any person was selling on Etsy for $950. I liked the inspiration of having a reside part replicate above the dresser that I’ve built few weeks in the past. So I made up our minds to build one that will fit the white wash effect of the dresser drawer boards.

I already had a reflect in my shed from an ancient sliding closet door, so I used it for this venture. Apart from the reflect, it price me about $60 to make this reside area reflect. I had to buy a full sheet of ½” plywood for the backboard, which left me with some further fabric. However I’m sure I’ll use it for my next mission.

diy live edge mirror
diy live edge mirror

Backboard for the mirror
step one is to cut a plywood backboard that would be attached in the back of the mirror. The plywood wishes to be taller in top than the mirror and shorter in length than the mirror.

diy live edge mirror
diy live edge mirror

reduce reside aspect
With a pencil draw two parallel are living edge designs on a board so that you’ll get higher and shrink boards. Make sure that the pencil traces do not overlap each and every other.

diy live edge mirror
diy live edge mirror

follow the pencil lines with a jig saw.

diy live edge mirror
diy live edge mirror

Stain and Paint are living aspect Boards
as soon as the live area boards are reduce, sand the boards to eliminate rough edges after jig saw reduce.

Stain the boards, then with a dry brush flippantly brush over the stain with plain white paint growing white wash impact you see in the snapshot.

diy live edge mirror
diy live edge mirror

attach backside reside aspect Board
Sandwich the plywood between the backboard plywood strip and are living side board. You’re going to have a hole between the are living aspect board and again plywood for the reflect to slide in.

diy live edge mirror
diy live edge mirror

attach Backboard to the Wall
Now it’s time to glue the backboard to the wall. First, take a stage and draw a line on the wall. Next, making use of Stud Finder, find and mark the studs proper above the horizontal line. The mirror could be very heavy and wants to be attached to studs now not just sheetrock.

diy live edge mirror
diy live edge mirror

attach Simpson robust-Tie to upper reside side Board
Take the upper reside side board and connect 1 Simpson strong-Tie 18-gauge galvanized steel attitude on the highest. Make the brink of the galvanized angle flush with the front of the are living aspect board.

diy live edge mirror
diy live edge mirror

situation the replicate and top live edge in position
And for the ultimate step, slide in the mirror in the back of the backside reside edge, and then slide the top are living aspect in the back of the backboard. You’re achieved with DIY live edge reflect.

if in case you have any strategies or questions, depart a remark under.

DIY Reside Facet Reflect Uploaded by Dylan D. Johnson on Thursday, October 24th, 2019. We have 13 great pictures of DIY Reside Facet Reflect. Find DIY Globalnet on category Modifying.

See also from Modifying Topic.

Here we have 13 great photos about DIY Reside Facet Reflect. We hope you enjoyed it and if you want to download the pictures in high quality, simply just click the image and you will be redirected to the download page of DIY Reside Facet Reflect.

Related Post to DIY reside facet reflect

Leave a Reply

Your email address will not be published. Required fields are marked *