DIY live part replicate

I got here throughout a picture on Pinterest of a reside part reflect that any person was selling on Etsy for $950. I liked the suggestion of getting a reside part mirror above the dresser that I’ve developed few weeks ago. So I made up our minds to build one that might healthy the white wash outcome of the dresser drawer boards.

I already had a mirror in my shed from an ancient sliding closet door, so I used it for this assignment. Besides the mirror, it cost me about $60 to make this reside facet mirror. I had to buy a full sheet of ½” plywood for the backboard, which left me with some extra material. However I’m certain I’ll use it for my subsequent project.

diy live edge mirror
diy live edge mirror

Backboard for the reflect
the first step is to cut a plywood backboard that would be hooked up in the back of the replicate. The plywood desires to be taller in top than the replicate and shorter in size than the replicate.

diy live edge mirror
diy live edge mirror

reduce reside edge
With a pencil draw two parallel reside part designs on a board so that you just’ll get upper and slash boards. Make sure that the pencil lines don’t overlap each and every different.

diy live edge mirror
diy live edge mirror

follow the pencil traces with a jig saw.

diy live edge mirror
diy live edge mirror

Stain and Paint reside part Boards
as soon as the reside aspect boards are cut, sand the boards to eliminate rough edges after jig noticed cut.

Stain the boards, then with a dry brush calmly brush over the stain with undeniable white paint developing white wash influence you see in the image.

diy live edge mirror
diy live edge mirror

attach bottom live part Board
Sandwich the plywood between the backboard plywood strip and live area board. You will have a gap between the are living side board and again plywood for the replicate to slide in.

diy live edge mirror
diy live edge mirror

connect Backboard to the Wall
Now it’s time to connect the backboard to the wall. First, take a stage and draw a line on the wall. Subsequent, making use of Stud Finder, locate and mark the studs right above the horizontal line. The reflect could be very heavy and needs to be hooked up to studs not simply sheetrock.

diy live edge mirror
diy live edge mirror

connect Simpson strong-Tie to upper are living edge Board
Take the upper live facet board and fasten 1 Simpson robust-Tie 18-gauge galvanized steel angle on the top. Make the threshold of the galvanized attitude flush with the entrance of the reside area board.

diy live edge mirror
diy live edge mirror

situation the mirror and prime reside side in position
And for the ultimate step, slide in the mirror behind the bottom reside edge, after which slide the top reside edge at the back of the backboard. You’re performed with DIY live aspect mirror.

you probably have any recommendations or questions, depart a remark beneath.

DIY Live Part Replicate Uploaded by Natasha Meeks on Monday, October 7th, 2019. We have 13 great pictures of DIY Live Part Replicate. Find DIY Globalnet on category Remodeling.

See also from Remodeling Topic.

Here we have 13 great photos about DIY Live Part Replicate. We hope you enjoyed it and if you want to download the pictures in high quality, simply just click the image and you will be redirected to the download page of DIY Live Part Replicate.

Related Post to DIY live part replicate

Leave a Reply

Your email address will not be published. Required fields are marked *