How to Create a Modern Board and Batten Accent Wall

We finished our basement multiple years ago, and grew to become a part of it into a work out room. We’ve used it plenty and it’s been exquisite to have, but Brooke and I even have continually felt find it irresistible needed a touch something from a layout standpoint. Four undeniable white partitions have been becoming a little uninteresting. So we determined to add an accent wall.

how to create a modern board and batten accent wall
how to create a modern board and batten accent wall

We completed our basement a couple of years ago and became a part of it into a piece out room. We’ve used it a lot and it’s been wonderful to have, but Brooke and I actually have constantly felt like it wished a touch some thing from a design perspective. Four undeniable white walls had been turning into a bit boring. So we decided to add an accessory wall.

If you’ve seen the exterior of our residence, you know that we’ve used quite a chunk of board and batten. Why now not deliver that interior and provide it a modern twist?

In this newsletter, I’ll show you ways I created our modern board and batten accessory wall.

Here’s what you’ll want:

The first thing I did turned into to measure the width and peak of the wall. Then I began designing how the batten strips would be laid out. I cited that this will be a board and batten accent wall with a modern-day twist. Well, the “twist” became literal. Instead of going for walks the battens vertically like everyday, I decided to run them turned at a forty five-degree angle.

If you’ve read any of my different DIY tutorials, you recognize that I am a massive fan of using Sketchup to design and plan initiatives. If you’re presently the usage of pencil and paper, I especially advocate attempting it out. It’s extremely intuitive and there’s a loose model that runs proper in your browser.

So the usage of SketchUp, I drew the wall based on the measurements that I took. From here, I created some 1×4’s and began playing with distinctive designs. The important purpose was to create a groovy layout and try and pass over as many electrical retailers as I could. Cutting round those can grow to be time-eating.

I additionally made it a concern to have balanced spacing in the layout. Each piece ended up being spaced 12″ apart.

Here’s what I got here up with:

how to create a modern board and batten accent wall
how to create a modern board and batten accent wall

Since I modeled the entirety to scale, I turned into able to use the tape measure tool in SketchUp to get the exact measurements for every strip.

how to create a modern board and batten accent wall
how to create a modern board and batten accent wall

In order for the strips to be securely attached to the wall, they want to be nailed to a stud, which might be the two×four’s in the back of the sheetrock. I used a stud finder to find every one across the wall and marked them with a pencil. This allowed me to see where to shoot the nails.
GAMBAR3

Using the measurements from my Sketchup version, I cut each piece of 1×4, making sure the miter saw become set successfully at 45 tiers. It’s easy to get combined up, so double test which piece you’re slicing and which way the 45-diploma reduce is walking.
I started out through nailing up the two longest pieces.
To make spacing less complicated, I located a scrap piece of wooden, and cut it to twelve″ in length, and used it as a spacer as I nailed up each piece.
I continued this until all the pieces had been nailed to the wall.

Once I had all the pieces nailed up, it became time to fill all the nail holes. I strive now not to head loopy with the nail gun while doing this sort of assignment. I use simply enough nails to keep due to the fact filling holes is probably my least preferred element to do.

I filled each hole with spackling the use of my finger, leaving a little more at the surface. This will ensure no indentions after sanding.
Once the spackling turned into dry, I sanded all the battens with high-quality sandpaper.

Once all the sanding was performed, I caulked all the boards so there had been no gaps displaying between them and the wall.
And as soon as the caulk had dried, the final step was to color the wall. I used a foam roller for a smooth end. And used the equal paint that I used at the wall.
And right here it’s miles with work out device and TV lower back in place!

How To Create A Modern Board And Batten Accent Wall Uploaded by Anna W. Oneal on Friday, December 6th, 2019. We have 3 great pictures of How To Create A Modern Board And Batten Accent Wall. Find DIY Globalnet on category Repairing.

See also from Repairing Topic.

Here we have 3 great photos about How To Create A Modern Board And Batten Accent Wall. We hope you enjoyed it and if you want to download the pictures in high quality, simply just click the image and you will be redirected to the download page of How To Create A Modern Board And Batten Accent Wall.

Related Post to How to Create a Modern Board and Batten Accent Wall

Leave a Reply

Your email address will not be published. Required fields are marked *